OWNERS MANUAL
Page
3
of
12
SM - 280 DMX LIGHTING CONTROLLER
Version
20080324
Lightronics
Inc.
509
Central
Drive
Virginia
Beach,
VA
23454
757
486
3588
CONTROLS AND INDICATORS
1 SCANNER / SCENES Buttons (22): Activates a
Fixture, Scene, Scene Bank, or Chase during
programming or operation.
2. Indicate which function the SCANNER / SCENES
buttons are enabled for.
3. Select which function the SCANNER / SCENES
buttons are enabled for.
4. Channel Faders (8): Sets DMX channel values.
Ch 1-8 can be adjusted when Page A is selected.
Channels 9 - 16 are adjusted using Page B.
5. Auto / Insert:
Auto: Activates Auto-Run for Scenes and chases.
Insert: Inserts a scenes and chase steps in
programming mode.
6. Delete/Music:
Delete: Deletes scenes, chase steps and chases in
program mode.
Music: Activates Music Auto-Run for scenes and
chases.
7. Copy: Copies fixture settings during setup. Copies
scenes and chase steps in program mode.
8. Setup/Group:
Setup: Activates setup operation which enables you
to control how the fixture will respond to
several controller functions.
Group: Causes up to 6 Banks of Auto-Run scenes
to run at the same time.
9. X Fine: Activates pan control for the Up/Down
buttons.
10. Y Fine: Activates tilt control for the Up/Down
buttons.
11. , 12. Up, Down: Changes channel DMX values
during manual fixture operation. Scrolls
through
chase
steps.
13. Fine: Switches the Pan/Tilt wheels and Up/Down
buttons between large and small DMX
increments. Enables setup of speed and
fade preset values for chase operation.
14. Memory Card: Reader/Writer for an external 4MB
memory card which can be used
to
store
scene
and
chase
data.
15. LCD Display: Shows various controller status and
information depending on the
operation being performed.
Manual
Sel" Fi_sc_ba_ch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
23
24
25
26
27
28
21
