SL205C
Decorative, Spectral, Floating Paper, Optic Forms
Page 2 of 3
Job Information
Type:
Features
1. Reflector:
Specular aluminum, 16 ga.
2. Lens:
1 ¼" (29mm) thick clear acrylic finished with a
translucent diffused coating.
3. Trim Ring:
12 ga. aluminum. Stainless steel finish.
4. Socket Cup:
Heat dissipating die-cast aluminum. Positive
locking attachment, without tools, to reflector assures proper
optical alignment of lamp.
5. Mounting Frame:
Die-cast aluminum suitable for dry
ceilings.
6. Retaining Springs:
Rust resistant springs simplify reflector/
housing removal for inspection and maintenance.
7. Mounting Brackets:
16 ga. steel. Use 18" (457mm)
mounting bars (optional) or with standard ¾" (19mm), 1 ½"
(38mm) lathing channels (by others) or ½" (13mm) tubing (by
others). Adjust vertically from inside of fixture.
8. Junction Box:
14 ga. steel, 4" (102mm) x 3 ½" (89mm) x 2"
(51mm) box, allows inspection from below. UL “c/us” listed for
through branch circuit wiring with maximum of 8 no. 12, 90º C
conductors.
9. Screws:
Stainless steel, Philips head.
Mounting
Recessed, Non-IC Type (non thermal insulation contact).
Luminaire Weight:
6 lbs.
Electrical
Ballast:
Electronic Program Rapid Start T4 quad lamp ballast.
Universal voltage “U” ballast automatically detect 120 volts or
277 volts operation. No visible flicker on starting, internally
fused and protection circuit for lamp end of life. Sound rated “A”.
Designed for removal without tools from inside of luminaire for
easy field inspection or service replacement.
TE:
26/32W/42W TTT non-dimming
PM:
26/32W/42W TTT Powerspec dimming HDF by Lightolier-
Controls
TQ:
26/32W/42W TTT MARK-10 dimming by Advance
Lampholder:
GX24q-4 universal base, 4 Pin.
Options and Accessories
Mounting Bars:
1950
, set of 2, 18" (457mm) long.
1951
, set of 2, 30" (762mm) long.
T-Bar Anchor Clips:
1956
, set of 4, for anchoring mounting bars to T-Bar runners.
Labels
cULus Listed. Suitable for wet locations.
7 ¾"
(197mm)
9 ¼"
(235mm)
7 ½"
(191mm)
1 ⅛" MAX.
(29mm)
15"
(381mm)
12"
(318mm)
