631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1008
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster Recessed Downlighting
302MREX
Page 1 of 1
3 3/4" (95mm) Aperture Low Voltage MR16 12V Standard Frame-In-Kit (Non-IC)
Lightolier is a Philips group brand
Power Pack
Cut Out
Reflector Trim
302MREX (120V)
3-3/4" (95mm)
Accepts most 3-3/4" (95mm) 300 series trims; see Reflector
Trim specification sheets.
Complete fixture consists of Reflector Trim & Frame-In Kit. Select each separately
Features
1. Mounting Frame:
20ga. galvanized steel. Four slots are positioned 90º
apart to simplify alignment.
2. Mounting Bars:
(4) 18 ga. galvanized steel. 13" (330mm) long bars extend
to 27" (686mm), rotatable and lockable, integral T-bar tabs. Spike detail
eliminates the need of additional nailing.
3. Mounting Bars Locking Clip:
(1) locks mounting bars in place.
4. Snap-on Socket Cup:
22ga. galvanized steel. Easy snap-on to housing.
5. Socket:
Porcelain body ; Two-pin (GX5.3 base) Pre-wired with 18 ga. Teflon
250º leads to junction box.
6. Transformer:
Electronic, 60VA, Class 2 Transformer, 120 volt primary,
nominal 12 volt secondary, class "H".
7. Junction Box:
4" (102mm) x 3" (76mm) x 2" (51mm) 18 ga. galvanized steel .
CSA/UL certified for maximum of 8 No. 12 ga. 90º C through branch circuit
conductors. Integral cable clamp permit attachment of non metallic Loomex
without need of additional connectors. Pry-out knock-outs accept BX cable.
Easy access from both sides with snap-on covers.
8. Thermal Protector:
Meets CSA/UL requirements. Insulation, if used,
must be kept 3" (76mm) away from luminaire sides and junction box.
Accessories
Mounting Bars Extenders:
1964
20" (508mm) long. Set of 2
Mounting Bar Locking Clips:
0098
To lock mounting bars in place after installation. Set of 12.
Labels
Damp or Wet location rated depending on trim used.
9-1/2"
(244mm)
7"(175mm)
14"(356mm) MIN.
25"(635mm) MAX.
12-1/2"
(315mm)
5-3/4"
(146mm)
