background image

11

Installation and 

Operation

L

ATITUDE

Z

ONES

All of the United States is in the Northern Hemisphere

50

45

40

35

30

50

45

40

35

30

TX

NM

AZ

NV

CA

OR

WA

ID

MT

WY

UT

CO

NE

SD

ND

MN

IA

KS

OK

AR

MO

IL

WI

MI

IN

OH

WV

PA

NY

ME

GA

SC

NC

VA

KY

TN

AL

MS

LA

FL

DE

MD

NJ

RI

CT

MA

VT

NH

10

C

OMPLI

/B

RILLIANCE

II T

IME

C

LOCK

A.

Press ENTER.

B.

Use the UP and DOWN buttons to program your latitude 
(to within five degrees). Press ENTER.

C.

Use the UP and DOWN buttons and LEFT and RIGHT buttons
to input the day’s sunrise time. Press ENTER.

D.

Use the same buttons again to input the day’s sunset time. 
Press ENTER.

5.5

P

ROGRAMMING VARIATIONS WITH THE SUN

To schedule events to occur relative to sunrise or sunset (i.e. 15 minutes before sunset) instead of at a fixed time
(i.e. 6:00 PM) the Time Clock must be programmed with some information.  First, determine today's sunrise and
sunset times for your area.  Your local newspaper should contain this information.  Then look at the map on 
page 11 to determine which latitude listed is closest to your area.

45º  NORTH

LATITUDE

TODAY’S

SUNRISE - 5:30 AM

TODAY’S

SUNSET - 8:30 PM

A.

Press ENTER.

B.

Use the UP and DOWN buttons to select disabled or enabled.
Press ENTER.

5.6

D

ISABLING

ENABLING A PASSWORD

If the Time Clock is in an open space where anyone can accidentally change the time or room commands, you 
may choose to enable a password. No one will be able to enter the main menu without the password. The 
password (213) is the same for all Time Clocks. If you forget the password, call Lightolier Controls for assistance
at 1-800-526-2731. If you’re not concerned about unwanted changes to the commands, we recommend that you
disable the password. By doing so, you’ll have one less step to complete when programming changes to the Time Clock.

SET

PASSWORD

PASSWORD

DISABLED

A.

Press ENTER.

B.

Use the UP or DOWN button to select “CLEAR ALL EVENTS.” 

C.

Press ENTER to confirm the clearing off all events and exit.

5.8

C

LEARING ALL EVENTS

WARNING:  This function will ERASE all previous programming.

ARE YOU  SURE?

NO

VARIATION

WITH SUN

CLEAR ALL

EVENTS

A.

Press ENTER.

B.

Use the up or down arrow to select the desired format.

C.

Press ENTER to confirm and EXIT.

5.7

S

ET DATE TYPE

It is possible to select the format for the date: AMERICAN (MM,DD,YY) or EUROPEAN (DD,MM,YY)

MM/DD/YY

DATE TYPE

20

20

HI

70

60

60

70

AK

Содержание CL-TCC0









Отзывы: