Calculite
®
HID Downlight
C7E17HW
Page 1 of 2
7" Aperture, ED17 (Enclosed) Ceramic Metal Halide, Wide Beam
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Reflector Trim:
Clear anodized aluminum, 0.040” (16-ga.). Provides Wide
beam distribution; 50° visual cut-off to lamp and lamp image; self-flange
in painted white or aperture-matching polished flange. Consult factory for
other finishes.
2. Lamp Guard:
High heat resistant glass (as required by code).
3. Socket Cup:
Galvanized steel. Pre-wired with medium base pulse rated
socket. Snaps onto upper reflector for secure attachment without tools;
assures proper lamp alignment to optics for consistent performance.
4. Mounting Frame:
0.048" (18-ga.) galvanized steel includes pre-installed
mounting bars.
5. Mounting Ring:
0.048" (18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
6. Retention Springs:
Rust resistant springs secure cone in place for quick,
tool-less installation.
7. Frame Vertical Adjustment Mechanism:
Vertical adjustment mechanism
accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.
8. Mounting Bars:
0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"
long and lock securely into position. Built-in locking tabs provide positive
attachment to common T-bar systems. Self-centering feature simplifies
installation in 24" O.C. grid systems. Attaches to steel or wood joists without
accessories.
9. Ballast:
Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).
Accessible from below for inspection and/or replacement without tools.
10.Junction Box:
0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors; allows inspection from below.
Electrical
Electronic Ballast:
120V or 277V, 50/60 Hz., encased, high-power factor, T.H.D.
<15%, thermally and transient protected, RMI / RFI complies with FCC Part 18
non-consumer equipment, shut-down circuit at end of lamp life, sound rating
"A", -5°F minimum starting temperature, Type 1 outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
70W MH
M198/M143
120/277
0.67/0.28
78
100W MH M90/M140
120/277
0.90/0.43
110
Electrical (cont.)
Magnetic Ballast:
120/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum starting
temperature, Type 1 Outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps Input Watts
70W MH
M98/M143
120/277
1.90/0.80
94
100W MH M90/M140
120/277
2.40/1.10
125
Options and Accessories
Auxiliary:
Add suffix
A
to Frame-In Kit and Reflector Trim. See Spec.Sheet ”A“.
Emergency :
Add suffix
E
to Reflector Trim and Frame-In Kit. See Spec.Sheet “E”.
Slope Ceiling Adapters:
See Specification Sheet SCA.
Fuse (magnetic ballast):
Add suffix
F1
or
F2
to Frame in Kit (F1=120V, F2=277V)
Chicago Plenum:
Consult Factory
Labels
UL (Suitable for Damp Locations), CSA , (magnetic ballast only). I.B.E.W.
For 100W, install fixtures with minimum spacing: 2 feet from center-to-center
of adjacent luminaries; 1/2 inch from top of luminaire to overhead building
member; 1 foot from luminaire center to side building member.
Ceiling Cutout:
8” (203 mm) Dia.
Reflector Trim
Frame-In Kit
Lamp (Coated, Ceramic MH)
C7E17HW CLW
Specular Clear White Painted Flange.
CLP
Specular Clear Matching Flange.
CCDW
Comfort Clear Diffuse, White Painted Flange.
CCDP
Comfort Clear Diffuse, Matching Flange.
CCZW
Champagne Bronze, White Painted Flange.
CCZP
Champagne Bronze, Matching Flange.
C770MHE1
Electronic 120V
70W ED17, BD17 (Enclosed)
C770MHE2
Electronic 277V
70W ED17, BD17 (Enclosed)
C710MHE1
Electronic 120V
100W ED17, BD17 (Enclosed)
C710MHE2
Electronic 277V
100W ED17, BD17 (Enclosed)
C770MHU
Magnetic 120V/277V 70W ED17, BD17 (Enclosed)
C710MHU
Magnetic 120V/277V 100W ED17, BD17 (Enclosed)
