631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0808
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
ColorWash
C2X21LEDWW
Page 1 of 2
2 1/2" X 21 1/2" Aperture, LED Color-Changing Adjustable Wall Washer
Lightolier is a Philips group brand
Features
1. Heat Sink Housing:
Extruded aluminum, design thermally optimized to
reduce LED junction temperature to maintain light output, color and life.
Matte white or black flange.
2. LED Array:
Series of 48 high-power red, green, blue and amber (RGBA)
LEDs generate millions of colors and high quality white light at variable
color temperatures. Static colors and dynamic effects are programmable
by DMX controls. Average expected life, under normal operating conditions
is 50,000 hours with lumen maintenance of 70% of original light output.
Factory calibrated integral color sensor and self-adjusting feedback software
guarantee color consistency over life.
3. Adjustable Reflector Housing:
Molded high temperature polymer, matte
white or black finish. Adjusts from 0° - 45° vertically to accommodate various
ceiling heights and luminaire to wall mounting distance to ensure smooth,
even wall washing from ceiling line to floor; built-in vertical angle indicators
aid in aligning multiple luminaires; lockable.
4. MicroBlend optics:
Internal collective mixing technology ensures smooth
washing and color uniformity and eliminates undesirable color fringing.
5. Aperture Lens:
Tempered glass, fine texture provides additional mixing at
the aperture and minimizes the appearance of the individual RGBA sources.
6. Torsiontite Springs:
Secure solid state lighting module tight against ceiling
surface without sagging. Accommodates ceilings from ½” to 2” thick.
7. Power Supply Unit/Slave Control Drive Module:
PSU: 120VAC 50/60
Hz., Class 2, high power factor, FCC Class B approved, short circuit protection.
SCD: low voltage DC, provides power and data to control LED array with a
maximum of 8 LED channels. Electronics are enclosed in a black extruded
aluminum housing providing optimal thermal dissipation for reliable operation
and long life. Module is replaceable from below the ceiling.
8. DMX Connectors:
Two RJ45 jacks mounted at one end of PSU/SCD
module provide DMX512-In and DMX512-Out connections (see page 2). Uses
standard shielded, plenum rated (required for plenum ceilings), CAT5 round, 8
conductor, twisted pair, network cables (not supplied)
Features (continued)
9. Flexible Metal Conduit/Quick Connector:
Quick connector for easy field
data connection.
10. Mounting Frame:
0.048" thk., galv. steel.
11. Mounting Brackets:
0.060" galv. steel, adjust from inside of fixture. Use
3/4" or 1 1/2" lathing channel, 1/2" EMT, or optional mounting bars.
12. T-bar Mounting Clips:
Provide quick installation to 1 1/2" to 3" high 2 ft. on
center T-Bar grid ceiling systems without use of tool.
13. Junction Box:
UL and cUL Listed for through branch circuit wiring with max.
of (8) No. 12 AWG, 90ºC supply conductors.
14. Thermal Protector:
Meets (NEC) UL and (CEC) CSA requirements. Insulation
must be kept 3" away from fixture sides and wiring compartments and must
not be placed above fixture in a manner which will entrap heat.
Electrical
120V: Input Watts: Must be circuited for 75W Max.
Labels
cULus Listed for dry locations. I.B.E.W.
Ordering Information
Solid State Lighting Unit
Finish
Light Source
Frame-In Kit
Input Voltage
C2X21LEDWWWH
Matte White
RGBA LED Array
C2X21CCLEDWW1
120
C2X21LEDWWBK
Matte Black
For 277V, use Stepdown Transformer Cat. No. 7997
9 1/4" (235mm)
25 3/4" (654mm)
9 5/8"
(245mm)
12 1/2" (318mm)
3 5/8"
(93mm)
12 1/2" (318mm)
22 5/8" (575mm)
3" (76mm)
2 7/8" (73mm) Max.
11
1
6
4
10
5
3
12
8
14
2
13
7
9
1 1/8" (29 mm) Min.
3 1/2" (89mm) Max.
21 1/2" (546mm)
Ceiling Cutouts: 3 3/8" x 22"
