Lightmaxx LIG0016333-000, Руководство пользователя

Страница: 18 / 28

ENGLISH
Installation:
Be sure to check the unit for damage before use. Use the original packaging or a suitable
transport or storage packaging to protect the product from dust, moisture, etc. when not in use.
Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the
same type and electrical specifications!
Make sure to always place the unit on a stable surface, never install the fogger above the
audience, a little liquid can always drip from the fog output.
WARNING! (Risk of injury due to falling down)
Improper installation can cause considerable injury and damage!
The installation of the device should always be carried out by experienced personnel and
must be carried out in compliance with the mechanical and electrical safety regulations in
your country.
Hint! (transport)
Always empty the large water tank before transport! Open the water drain valve on the
bottom side of the fog machine. When the tank is empty, place the pull-out PVC hose in
the large water tank. To avoid pilling the secondary fluid, make sure that the secondary
fluid tank is not more than half full during transport.
Close the top lid of the flight case with the butterfly catches provided and release the
brake on the castors.
Make sure that the flight case does not tip over during transport!
Hint! (Fog fluid)
Disconnect the device from the mains before filling!
Do not fill with hot liquids!
Only use high-quality water-based fog fluids recommended by your dealer. Other fog
fluids can lead to clogging or dripping of the device.
Suitable fog fluid:
LightmaXX Premium PRO FLUID Nebenfluid 5L, Heavy Fog - LIG0008288-000
LightmaXX Premium DJ FLUID Nebelfluid 5L Standard Fog - LIG0007239-000
LightmaXX Premium XT FLUID Nebelfluid 5L X-treme Heav Fog - LIG0008342-000
The fog fluids recommended by the manufacturer are environmentally harmless and can
be disposed of via the sewer.
Make sure that there is always a sufficient amount of fog fluid in the tank.
A too low tank level can lead to pump damage and overheating of the heating element
during operation!