DEUTSCH
ENGLISH
FRANCAIS
ESP
AÑOL
26
Operation:
Menu:
Navigation in the menu is via the jog wheel next to the display. Turning or pressing the jog
wheel activates the menu, the navigation takes place by turning the jog wheel to the left („
Up
“)
and to the right („
Down
“), the confi rmation takes place by pressing the wheel („
Enter
“).
Die Menu-Struktur im Detail:
Mounting option:
This device can be positioned and fi xed in all directions of the stage by a
clamp. The locking system facilitates attachment to the bracket.
Note! Two clamps are required to secure the unit. Each clamp is secu-
red by a 1/4 lock. The lock can only be locked clockwise.
Note! Always attach a safety cable with suffi cient load-bearing ca-
pacity to the additional opening of the mounting block.
Check whether the fastening clip is damaged. Ensure that the architecture can withstand
ten times the weight of all equipment, clamps, wiring and other additional devices.
Clamping screws must be fi rmly tightened. Use an M12 screw (strength
class 8.8 or higher) to secure the clamp, then tighten the nuts.
Align the two suspension points on the underside of the clamp. Fasten the lock at the bot-
tom, lock the two levers by turning them 1/4 clockwise. Then install the other clamp.
Install a safety cable with suffi cient load-bearing capacity.
Make sure that the pan/tilt lock is not locked. Maintain a distance of more
than 12M between the light source and combustible materials.
DEUTSCH
ENGLISH
