16
Setting Reversed or Normal Pan
To select, use the “MODE/ESC” button and choose “Pan”(normal) or “r Pan” (reversed). “UP” and
“DOWN” buttons cycle between the two settings. Press the “ENTER” button to confirm the chosen
selection
Setting Reversed or Normal Tilt
To select, use the “MODE/ESC” button and choose “t.L” (normal) or “rt.l”(reversed).“UP” and “DOWN”
buttons cycle between the two settings. Press the “ENTER” button to confirm the chosen selection
Setting Reversed or Normal LED Display
To select, use the “MODE/ESC” button and choose “d.s”(normal) or “rd.s”(reversed). “UP” and
“DOWN” buttons cycle between the two settings. Press the “ENTER” button to confirm the chosen
selection
2-Auto Run Mode
One of two Auto Run Sub-modes can be selected with a choice of preset speeds .This mode enables
the unit to act as a Master to other Slave units
Choosing Auto Run Sub-modes
To select, use the “MODE/ESC” button to show “NAFA” or “NASL”. “UP” and “DOWN” buttons change
between the two initial options. With the appropriated option selected, use “ENTER” to confirm and the
LED Display with change to: “Fast” (fast) or “SloU” (slow). The unit will then run at the chosen speed
Initial LED Display
Second LED Display
Sub-mode
NAFA
Fast
Fast Auto Run
NAFL
SloU
Slow Auto Run
3-Sound Activated Mode
The unit responds to sounds picked up by the unit in microphone to create a light show. Each sound
picked up makes changes to color shown and position of the effects. This mode enables the unit to act
a Master to other Slave units
Choosing Sound Activated
To select, use the “MODE/ESC” button and choose “NStS”. When the “ENTER” button is pressed the
LED Display changes to “SrUn” and the unit enters Sound Activated Mode.
