15
4. Operating instructions
4.1 Navigating the control panel
Access control panel functions using the four panel buttons located directly under the Display.
4.2 Menu map
Six distinct operating modes, many with sub-modes, are supported by the unit. To selected use the
“MODE/ESC” button to enter the menu. “UP” and “DOWN” button choose from values available with
the “ENTER” button confirming any selection. After a few seconds, the LED Display will back during
operation until another button is pressed.
4.3 User configurations
Setting Maximum Pan Angles
To select, use the “MODE/ESC” button and choose “PA18”, “PA36”,or “PA54”. “UP” and “DOWN”
buttons cycle between all available Pan Angles.
Press the “ENTER” button to confirm the chosen
selection.
LED Display
Maximum Pan
PA18
180º
PA36
360º
PA54
540º
Setting Maximum Tilt Angles
To select, use the “MODE/ESC” button and choose “t.9” or “t.18” “UP” and “DOWN” buttons cycle
between all available Tilt Angles.
Press the “ENTER” button to confirm the chosen selection.
LED Display
Maximum Pan
t.9
90º
t.18
180º
1-in-built Program Mode (continued)
As the unit can be mounted hung under earth trussing, or can sit equally well on a flat surface, pan, tilt
and LED display settings can be reserved to provide correct coverage and ease of use.
