11
1.
Located on the front of the light, there is a switch with 3 positions (8) (see
fig 4).
a. Auto
: When the switch is in the AUTO position the LED solar security light
will turn on automatically at night once motion is detected.
b. ON:
When the switch is in the ON position the light will remain on and can
be used as a regular light.
c. OFF
: When the switch is in the OFF position, the light will remain off and will
not detect any movement.
2.
Allow the solar security light to charge for at least 3 days with the switch in
the OFF position.
How to use the control dials (see Fig. 7)
The solar security light has 3 different control dials
which allow you to adjust the settings.
•
LUX: Sensitivity to light.
•
TIME: The lights duration once motion has been
detected.
•
SENS: Sensitivity to motion.
LUX
•
This is the level of darkness reached before the light turn on.
•
If set to maximum level, the light will turn on in most situations ranging from
dusk to daylight.
•
If set to to minumum, the .sensor will only trigger when it is dark. This is the most
ideal position for general evening and night operation.
TIME
•
The time adjusting dial will set the duration of time. The light will stay illuminated
for the set time after the motion has been detected.
•
The time can be adjusted from 8 seconds to 2 minutes.
•
Rotating the dial clockwise will extend the time the lamp is illuminated.
SENS
•
This determines the rang of the motion detector.
•
Mid position - nomal setting.
•
Maximum position - maximises the sensor range (s. Fig 8 and 9).
Operation
Fig. 7
Содержание 10028966
Страница 1: ...Solar Fluter mit Bewegungsmelder 10028966 ...
