4
Supported protocols: DMX512
2 DMX modes (19/16 control channels)
Connection
DMX data in/out: Locking 3-pin and 5-pin XLR
AC power input: 1.5m power cord with plug
Mounting system
Mounting via omega brackets (included)
Temperatures
Maximum ambient temperature: 45
℃
Maximum housing temperature: 75
℃
Minimum distances
Min. distance from flammable surfaces: 3.0m
Min. distance to lighted object: 2.0m
Net dimension: 428(L) x 260(W) x 678(H) mm
Weight (net): 15.9kgs
Set Up:
Power Supply:
Before plugging your unit in, be sure the source voltage in your area matches the required
voltage for your MH-200 Hybrid Pro V2, The model is Auto power supply, It is workable in 90-250V/50~60Hz.
Please make sure your unit voltage matches the wall outlet voltage before attempting to operate you fixture.
Connection to the mains
For protection from electric shock, the fixture must be earthed!
Install a suitable plug on the power cord, note that the cores in the power cord are colored according to the
following table. The earth has to be connected!
If you have any doubts about proper installation, consult a qualified electrician.
Core
(EU)
Core (US)
Connection
Plug Terminal Marking
Brown
Light blue
Yellow/Green
Black
White
Green
Live
Neutral
Earth
L
N
DMX512 connection
The fixture is equipped with 3-pin or 5-pin XLR sockets for DMX input and output. The sockets are wired in
parallel.
Only use a shielded twisted-pair cable designed for RS-485 and 3-pin or 5-pin XLR-plugs and connectors in
order to connect the controller with the fixture or one fixture with another.