18
15
0
255
Focus
19
16
0
127
NO
128
255
All-Reset
Fixture dimension 380x247x550 (mm):
Rigging the fixture
Caution
: Fixture may cause severe injuries when crashing down! If you have doubts concerning the safety of a
possible installation, do not install the moving head! Before rigging make sure that the installation area can hold a
minimum point load of 10 times the fixture’s weight.
When installing the device, make sure there is no highly inflammable material (decoration articles, etc.) in a distance of
min. 1.0 m.
CAUTION!
Use an appropriate clamp to ring the fixture on the truss.
Follow the instructions mentioned at the bottom of the base. Make sure that the device is fixed properly! Ensure that
the structure (truss) to which you are attaching the fixtures is secure.
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew).
Troubleshooting
Unit not respond to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other DMX devices pin
5 may be ‘hot’). Also, check that all cables are connected to the right connectors; it does matter which way the inputs and
outputs are connected.
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE BSL B.V. | SPAARPOT 19| 5667 KV GELDROP | THE NETHERLANDS
+31 (0)40 750 24 95 WWW.BSL-LIGHTING.COM | WWW.LIGHT-INC.EU