©
LSC Supply
®
- Auto-Mate/DMX™ Instruction Manual Page 4
Auto-Mate/DMX™
Safety Warnings
Introduction:
The Auto-Mate/DMX™ is a Plug and Play DMX Con-
troller with 8 programmed chases (4 slow and 4 fast). It has 256 DMX
channels and each of the 8 Chases Programs can contain up to 60
steps. This unit comes with programmed chases for either the Ameri-
can DJ
®
Spiral Scan, DJ Scan, DJ Roller, Rainbow 250, Max, Mighty
Scan, Pocket Scan, or X-Calibur. Be sure you have purchased the unit
that comes with programs for your specific fixture. All the chases are
designed to operate in conjunction with the Strobe, Fast, Slow, and
Blackout functions. You can also store your own chases on any of the 8
program banks, by using an External DMX controller such as the LSC
®
Show Designer.™ Storing your own programs however, will erase any
existing program that is stored in a particular memory bank.
Customer Support:
LSC
®
provides a toll free customer support line,
to provide set up help and to answer any question should you encoun-
ter problems during your initial set up or operation. You may also visit
us on the web at www.lightstreamcontrols.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:
30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service, please contact
LSC
®
customer support.
Do not discard the packing carton in the trash. Please recycle
when ever possible.
Auto-Mate/DMX™
Introduction
Auto-Mate/DMX™
Unpacking
Every Auto-Mate/DMX™ has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your controller for any
damage and be sure all equipment necessary to operate the unit has
arrived intact. In case damage has been found or parts are missing,
please contact our toll free customer support number for further instruc-
tions, please do not return the controller to your dealer.
• Do not spill water or other liquids into or on to your unit.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• For adult use only - Keep out of the reach of children.
• Always use a power supply that meets the manufactures exact power
specifications
• Be sure that the local power outlet match that of the required voltage
for your power supply.
• Do not attempt to operate this unit if the power cord has been frayed
or broken.
• Disconnect from main power before making any type of connection.
• Do not remove the unit covers under any conditions. There are no
user serviceable parts inside.
• Never operate this unit when itʼs covers are removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (includ-
ing amplifiers) that produce heat.
• Do not attempt to operate this unit, if it becomes damaged in any
way.
• This unit is intended for indoor use only, use of this product outdoors
voids all warranties.
• During long periods of non-use, disconnect the unitʼs main power.
• Always mount this unit in safe and stable matter.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer.
©
LSC Supply
®
- Auto-Mate/DMX™ Instruction Manual Page 3