Mounting and installation
7
Cautions:
For added protection mount the fixtures in areas outside walking paths, seatingareas,
and away from areas were unauthorized personnel might reach the fixture.
Before mounting the fixture to any surface, make sure that the installation area can
hold a minimum point load of 10 times the device's weight. Fixture installation must
always be secured with a secondary safety attachment, such as an appropriate safety
cable. To avoid injury, never stand directly below the device when mounting, removing,
or servicing the fixture.
Mounting points:Overhead mounting requires extensive experience, including amongst
others calculating working load limits, a fine knowledge of the installation material
being used, and periodic safety inspection of all installation material and the fixture.
If you lack these qualifications, do not attempt the installation yourself. Improper
installation can result in bodily injury. Be sure to complete all rigging and installation
procedures before connecting the main power cord to the appropriate wall outlet.
cautton! Be sure a qualified electrician performs all electrical connections.
Mounting:
Our company is fully operational in any mounting position, hanging upside-down, side
mounted, or set on a flat level surface, etc. Be sure this fixture is kept at least 0.5m
(about 1.6feet) away from any flammable materials (decoration etc.).
When clamp mounting; always use and install the supplied safety cable as an added
safety measure to prevent accidental damage in the event of a clamp failure. See the
image below.
