Light Sky BUMBLEBEE Series, Руководство пользователя

Страница: 27 / 30

26
◎
Please check whether the DMX512 controller pass the “turn on”oder.
检查 DMX512 控制器是否发送了开灯泡指令；
◎
Please check the connection of the trigger circuit is loose contact
.
检查灯泡与触发线路是否有脱落或解除不良；
◎
Please check whether the connected point of he trigger point is loose contact
,
faster the
connect cable
.
检查内部触发器上的接线端子是否接触不良,紧固好插头;
◎
Check menu
“
information
”→
fan speed
/
voltag
→
fan1
,
fan2
,
fan3
”，
Whether the fan speed
in 500
RPM
above
,
below 500RPM the lamp does not light
,
replace with the specifications of
the fan
.
检查菜单“基本信息”中“风机速度电压，查看 FAN1FAN2FAN3 的转速是否在 500RPN 以上，低于
500RPM 灯泡不会
亮，更换同规格风机。
◎
Please check if the switch of the temperature is damaged.
检查灯具内部超温保护温度开关是否损坏。
◎
Enter the menu
“
information
”
select
“
temperature
”
to see whether the temperature display
boad is too high or no temperature display.
进入菜单“基本信息”选择“设备温度”查看测温板是否显示温度过高或无温度显示。
■
The light beam dark
,
not inhomogeneou .
光束显得暗淡不均匀。
◎
when the lamp is to the usage life
,
the light is not enough
,
please change a new one for
the same description
.
灯泡可能已经达到使用寿命,发光不足,更换同规格的灯泡.
◎
Please check the reflector parts is dirty.Keep them clear.
检查光学部分是否堆积有灰尘,清洗干净.
◎
Please measure if the power supply is enough
.
测量电力是否供应不足；
◎
Small adjusting is suitable for change height or screw systen till get a ideal light beam.
细微调整用于变化灯泡高度的螺丝装置,直至调出理想的光.
◎
Enter the menu
“
service options
”
to choose
“
calibration
”
to enter the
“
Color” and
“
Gobo
”
adjustment
,
the center can be modulated
.
进入菜单“服务选项”选择“校准”进入颜色和图案调节，可调至中心.
■
T
he light shadow is fogging
投射出来的影像模糊。
◎
Please check the data on the DMX 512 controller is suitable for the electric focus.
检查电子对焦系统对应的 DMX512 控制器通道数值是否合适现在的投射距离 。
◎
Please check the machenical parts is jamging.After cleaning,please add some
temperature -durable juice.
检查调焦系统的机械部分是否卡住，去尘埃后添加防冻和耐温润滑油。
■
The light works interruptly
灯具灯泡间歇性地工作
◎
Please check if the fan works normally or mote clogging.
检查风机是否正常运转或有尘埃和纸屑堵塞。
◎
Please check whether the abstract heat have the mote clogging.
检查进出散热风口是否有尘埃堵塞 。
◎
Please check if the lamp is to the usage life.
检查灯泡是否已达到使用寿命。
◎
Please check if the power supply is enough,the connection of the power supply or the circuit are
good.
检查电力是否供应不足，电源开关及线路是否接触不良与老化。
◎
Please check if the switch of the sup-temperature is good.
检查灯具内部超温保护温度开关是否损坏。