8
Used as a USB Power Supply
Your POWERLIGHT RESCUE can be used to power or recharge a wide variety of small
electronic devices.
1. Connect your device’s charging cable to the device.
2. Connect the USB end of the charging cable into a POWERLIGHT RESCUE USB
port.
3. Press the Power Button to activate USB charging.
Used as a WorkLight
The POWERLIGHT RESCUE features several different work light modes. The
sequence below explains how the unit cycles through each of these modes:
1. First Power Button press turns the unit ON, activating the USB ports and battery
status panel.
2. Second press turns ON the primary work light.
3. Third press turns ON solid red warning light.
4. Fourth press turns ON flashing red warning light.
5. Fifth press turns ON focus beam light.
6. Sixth press turns ON focus beam light SOS signal.
7. Seventh press turns entire unit OFF.
Note: While in any of the above work light modes, you can turn the unit OFF by
pressing and holding the Power Button for four seconds. You will see the battery status
panel turn OFF at that time.
