LEGO GHOSTBUSTERS ECTO-1 10274 LIGHT & SOUND KIT INSTALL GUIDE
INSTAL ATION GUIDE
39
STEPS
38.
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND:
DISCONNECT
TURN / FLIP
TWIST / BRAID
DIRECTIONAL
POWER ON / TEST
CONNECT / RECONNECT
The 4 roof lights
should be pulsing in
sync
Pull up the
15cm Connecting
Cable from the
12-Port Expansion
Board
Ensure you connect
the 15cm Cable to
the 6-Port Expansion
Board from step. 36
NOT from step. 35
39.
Plate 1x6
Do not securely
reconnect the roof yet.
Take the two 1x6
plates we removed
from step 32. as well
as an extra provided
1x6 plate
x 2
