INSTRUCTIONS 54
DIRECTIONAL
CONNECT
DISCONNECT
TURN / FLIP
NOTE ICON
POWER ON TEST
TWIST / BRAID
BEND / PIVOT
LEGO
®
VENETIAN HOUSES 910023 LIGHT KIT INSTALL GUIDE
NOTE
Connect to a 5V USB Power
Bank, 5V USB Wall Adaptor, or
USB to AA Battery Pack (sold
separately)
NOTE
If you want to keep it in this
configuration, tuck the excess
cable underneath the base
plate.
NOTE
You can rotate the buildings to
be in this configuration. Take
care of the connecting cable
between them when rotating.
NOTE
The buildings can also be in
this configuration. Move the
power cable to the opposite
side.
Removed Pieces
NOTE
You should have these parts
left over that were removed
from the LEGO set
If you experience any issues with the
lights not working and suspect an issue
with a component, please try a different
port on the expansion board to verify
where the fault lies (with the light or
expansion board). To correct any issues
with expansion board ports, please view
the section addressing expansion board
issues in our troubleshooting section.
!
!
