M a n d a l a V N S t a r U s e r M a n u a l
| 15
www.light-mandalas.com
➢
Align the mark of the cable head to the laser output head.
3. Put the crystal bead into the Pyramid
Crystal Holder.
4. Install the Pyramid Crystal Holder onto the cable. Turn ON Laser Key Switch
to release the laser. Tune the Sensitivity Knob to adjust the brightness of light
wand.
I
n order to receive complete pattern energy, it’s recommended to adjust
sensitivity knob to 9 or 10 o’clock.
•
Adjust too over will cause the projected pattern to be too big
which unable the pattern to fit in completely into light wand.
