7
4.
RIGGING THE FIXTURE
Caution
:
•
Fixture may cause severe damage when falling down. If you have doubts concerning the safety of a possible
installation, do not install the moving head.
•
Before rigging make sure that the installation area can hold a minimum point load of 10 times the fixtures
weight.
•
When installing the device, make sure there is no highly inflammable material (decoration material etc.) in a
distance of 1.0 m.
•
Use an appropriate clamp to rig the fixture on the truss.
•
Follow the instructions mentioned at the bottom of the base.
•
Make sure that the device is fixed properly. Ensure that the structure (truss) to which you are attaching the
fixtures is secure.
Securing the fixture via one safety wire Securing the fixture via two safety wires
5.
FEATURES
•
Multi-
gobo’s
•
Color strobe
•
Electronic Dimming 0-100%
•
DMX-512 protocol
•
Master/Slave synchronization
•
LCD operation menu with function buttons
•
Daisy Chain units together in DMX Mode
