MAINTENANCE & PERIODIC CHECKS
CAUTION
:
Some maintenance and checks may require the product to be opened and
should only be done by qualified persons. Warranty may be void if damage
has been caused by improper maintenance
•
Perspex lenses should be wiped with a clean moist cloth to remove
dust and residue
CONNECTIONS AND CONTROLS
1. Power input
2. Fuse Holder
3. Sound sensitivity pot
4. Dip switches
5. DMX input socket
6. DMX output socket
POWER
CAUTION
: This lighting effect is designed to
operate at 240V.
Power Consumption UVLED: 55W
Power Consumption UVLED1: 12W
Power Consumption LEDSTROBE: 12W
FUSE
CAUTION
:
Only use the correct fuse as specified on the rear panel of the lighting effect.
Disconnect the lighting effect from the mains before attempting to replace the
fuse
NOTE
:
This lighting effect has a position for a spare fuse
located in the fuse holder toward the outside of the
fixture
To replace the fuse please follow the following steps
1. Remove the fuse holder with a screw driver
(Refer to fig 4.)
2. Remove existing fuse
3. Fit new fuse
4. Refit the fuse holder
Fuse: M205 2A fast
4/8
