3
•
Never connect the device to a dimmer pack.
•
Make sure power cord is never crimped or damaged.
•
Never disconnect power cord by pulling or tugging on the cord.
•
Avoid direct eye exposure to the light source while it is on.
INSTALLATION:
CAUTION
: For safe mounting, read the following
instructions carefully:
•
Use suitable hook clamps for hanging the lighting
effect.
•
Use a safety wire with a breaking strain of more than
double the lighting effect.
•
Do not look directly into the light source.
•
Make sure the lighting effect has suitable ventilation
as per the instructions below.
•
This lighting effect is intended for indoor use only to
avoid electrical shock keep away from rain and
moisture.
•
Keep unit out of reach from children.
NOTE
: Use washers and spring washers when attaching your hook clamp to the yoke.
1.
For installation of the hook clamps and safety wire.
2.
This lighting effect must be 0.5m away from any flammable materials or any walls or
ceilings.
3.
Do not block or inhibit the air flow from the ventilation vents.
Light Emotion has various hook clamps and safety wires suitable for your ST1500. Please
contact your local dealer for more information.
MAINTENANCE & PERIODIC CHECKS:
CAUTION
: Some maintenance and checks may require the product to be opened and
should only be done by qualified persons. Warranty may be void if damage has been
caused by improper maintenance. Perspex lenses should be wiped with a clean moist
cloth to remove dust and residue (only when unit is switched off and cool).
FUSE:
CAUTION
: Only use the correct fuse
as specified on the rear panel of the
lighting effect. Disconnect the lighting
effect
from
the
mains
before
attempting to replace the fuse.
