Light Emotion ST1500 Скачать руководство пользователя страница 2

 

Congratulations  on  the  purchase  of  your  ST1500  by  Light  Emotion.  It  is  a  1500w 
Strobe  with  DMX  function.  We  are  confident  that  you  will  be  satisfied  with  your 
purchase. We have prepared this manual to assist you with the operation of this item. 

 
CONTENTS 

SECTION                                                                                                                Page 

WHAT IS INCLUDED, SAFETY INSTRUCIONTS                                                      2 
INSTALLATION, MAINTENANCE

 & PERIODIC CHECKS

, FUSE                            3

 

POWER, FEATURES, SPECIFICATIONS                                                                     4 
 
Please note that as part of our ongoing commitment to continuous improvement and 
product development, the specifications in this manual are subject to change without 
notice. Whilst every care has been taken in the preparation of this manual we reserve 
the right to change specifications in the course of product improvement.  

WHAT IS INCLUDED: 

CAUTION

: Do not use sharp objects whilst unpacking this product  

 

1 x ST1500

 

 

1 x Warranty card 

 

1 x User manual 

Please note: Some of the items above may be fitted to the product by the manufacturer. 

SAFETY INSTRUCTIONS: 

Please  read  these  instructions  carefully.  It  includes  important  information  about  the 
installation, usage and maintenance of this product. 

 

Please  keep  this  User  Manual  for  future  consultation.  If  you  sell  the  unit  to 
another user, be sure that they also receive this instruction booklet. 

 

Always make sure that you are connecting to the proper voltage and that the line 
voltage you are connecting to is not higher than that stated on the rear panel of the 
fixture. 

 

This product is intended for indoor use only! To prevent risk of fire or shock, do 
not expose fixture to rain or moisture.  

 

Make sure there are no flammable materials close to the unit while operating. 

 

The  unit  must  be  installed  in  a  location  with  adequate  ventilation,  at  least  50cm 
from adjacent surface. Be sure that no ventilation slots are blocked. 

 

Always  disconnect  from  power  source  before  servicing  or  replacing  fuse  and  be 
sure to replace with same fuse source. 

 

Secure  fixture  to  fastening  device  using  a  safety  chain.  Never  carry  the  fixture 
solely by its head. Use its carrying handles. 

 

In the event of serious operating problem, stop using the unit immediately. Never 
try to repair the unit by yourself. Repairs carried out by unskilled people can lead 
to  damage  or  malfunction.  Please  contact  the  nearest  authorised  technical 
assistance center. Always use the same type spare parts. 

Содержание ST1500

Страница 1: ...manual This manual contains important information about the safe installation and use of this product Please read this instruction manual carefully before installing or operating Please keep these instructions in a safe place for future reference www lightemotion com au ...

Страница 2: ...usage and maintenance of this product Please keep this User Manual for future consultation If you sell the unit to another user be sure that they also receive this instruction booklet Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on the rear panel of the fixture This product is intended for indoor use o...

Страница 3: ...s and spring washers when attaching your hook clamp to the yoke 1 For installation of the hook clamps and safety wire 2 This lighting effect must be 0 5m away from any flammable materials or any walls or ceilings 3 Do not block or inhibit the air flow from the ventilation vents Light Emotion has various hook clamps and safety wires suitable for your ST1500 Please contact your local dealer for more...

Страница 4: ...ch all off 2 Connect ST1500 to main power supply Red indicator would be on 3 Adjust the strobe speed and brightness Sound active mode 1 Select dip switch 9 on and the rest are all off 2 Connect ST1500 to main power supply Red indicator would be on 3 Adjust sound sensitivity 2 Channel DMX control mode 1 Select dip switch 10 on use dip switch 1 to 9 to select DMX address 2 Connect DMX cable to DMX51...

Отзывы: