LIGHT EFFICIENT DESIGN HEADQUARTERS
188 S. Northwest Highway
•
Cary, IL 60013
INNOVATION & MANUFACTURING CENTER
30 Log Bridge Road, Building 200
•
Middleton, MA 01949
847.380.3540
•
led-llc.com
04.08.22 Information is subject to change without notice.
OG/HYBRID 365 AREA LIGHT
SL-SAL-OG/HYB-50W-XXK-SF-G2
SOLAR
LIGHTS
INSTRUCTIONS
WARNING AND ATTENTION:
1. Before installation, please ensure that the foundation, pole and bracket are strong enough to support the light fixture.
2. Position the solar panel to optimize its exposure to sunlight. Always face the equator if possible (solar panel to face south
if located in the northern hemisphere, for example).
3. In order to allow self-cleaning of the solar panels, please have a minimum angle of 15 degrees.
4. Adjust the angle of the panel to optimize exposure to sunlight. Avoid north facing panels in the USA
5. The fixture will be active once the solar panel is connected to the fixture’s solar panel connector wire.
6. Please make sure that the panel is installed under direct sunlight. The red light should be flashing, indicating that it is
charging.
7. The lighting fixture will automatically turn on at night and turn off during daylight. The solar panel acts as a photocell.
8. Please select an operating mode according to the local legislation needs and the local sunshine conditions.
9. The battery of the HYBRID 365 fixture will stop charging when the ambient temperature is below -4°F or
above
140°F.
The working temperature of the solar fixture is -40°F (-40°C) to +140°F (+60°C). When operating in an environment with a
temperature lower than -40°F (-20°C), line voltage will kick in to operate the light.
