LIGHT EFFICIENT DESIGN HEADQUARTERS
188 S. Northwest Highway
•
Cary, IL 60013
INNOVATION & MANUFACTURING CENTER
30 Log Bridge Road, Building 200
•
Middleton, MA 01949
847.380.3540
•
led-llc.com
04.08.22 Information is subject to change without notice.
OG/HYBRID 365 AREA LIGHT
SL-SAL-OG/HYB-50W-XXK-SF-G2
SOLAR
LIGHTS
INSTRUCTIONS
INTRODUCTION: REMOTE-CONTROL
The default setting is Dusk ‘til Dawn @80% First 2 hours, 50% constant & 80% w/ motion for
the remainder of the night, *remote does not need to be connected or adjusted if your lighting
goals are met.
QUICK START GUIDE
START UP THE REMOTE BY CLICKING ANY
BUTTON
a. The remote has a range of about 24ft
b. The fixture will operate in the default mode without using the
remote.
c. You may want to adjust the settings based off your
geographical area to attain more solar powered operation,
rather than pulling from the grid. We can change the settings
by following the below:
DEFAULT OPERATING MODE
a. For the first 2 hours the product runs at 80% fixed output.
b. The next 12 hours, it will run it at 50% idle & 80% when motion is sensed.
c. After motion detector will allow the fixture to return to idle state after no motion is
detected for 30 seconds.
d. When the solar panel detects daylight, it will shut off for the day.
CUSTOM SETTING OF TIME AND POWER LEVELS
It is recommended to allow the light to operate under the default settings. If necessary,
the settings can be customized. Please be aware that incorrect settings could cause the
light to
