Mount the Pre-amplifier on the Mast Stub of your MaxRange Antenna per the
instructions using the Cable Ties provided.
Weatherproof the other cable end of the short cable by sliding the Cable Boot over
the cable connector. Then connect the cable end with Cable Boot to the “ANT.”
connector of the Pre-amplifier. Tighten the connector and slide the boot up to cover
the Pre-amplifier connector.
The other Cable Boot is used to weatherproof the cable end of the cable that is
connected to the “TV” connector of the Pre-amplifier.
The orientation of the Pre-amplifier should be as shown with the connectors at the
bottom of the Pre-amplifier.
Assembly Instructions
13
MaxRange Ultra Antenna
