Light & Motion Bluefin SR11, Руководство пользователя, Страница: 15 / 28

13
(Fig. 23) (Fig. 24)
Lens Installation / Removal
To Install Lens
(fig. 23 & 24)
1. Perform O-ring inspection.
2. Align lens to housing details.
3. Press lens into housing.
4. Rotate clockwise until Locking pin engages.
To Remove Lens
1. Slide Locking pin outward away from lens.
2. Rotate lens counter clockwise.
3. Pull away from housing.
Reversing Smart Grip Button Functions
Smart Grips can be programmed to swap left and right button functions. This is useful if a Smart
Grip battery becomes exhausted during a dive. You then can swap Smart Grip functions to
maintain primary housing operation.
This is a total button function swap, not a button-by-button nor a custom configuration.
Press either “Far” and “Near” or “Tele” and “Wide” buttons simultaneously and hold for
three seconds. Button functions are now swapped. Button functions will mirror opposite
handle, i.e. “Rec” and “Photo”, “AF/Off” and “Info”.
This is a handle-by-handle procedure. Performing this function on one handle will not switch
both of the handles at once.