Step 7:
Loosen the 2 pinch bolts that secure the pivoting
center post.
Hold the bottom of the grade rod level with the
Raise or lower the pivoting center post for proper
concrete slab grade height.
Step 8:
Pivot the head so it is perpendicular to the
machine OR slightly open on the right side.
Retighten the 2 pinch bolts to secure.
Step 9:
Step 10:
Hold the bottom of the grade rod level with the
sides of the screed head.
Adjust the front downriggers with the remote until
Step 11:
OR
Turn the red Auto Level switch on the boom cover
plate to the “ON” ( I ) position.
On remote, set Vibrate switch to the “AUTO”
(middle) position then set Auto Level switch to
the “ON” position.
Adjust the laser eyes up/down until a green light is
displayed and lock them in place.
Begin screeding.
verify proper setup. Make adjustments by moving
the laser eyes as necessary.
Step 12:
