Liftup A/S
| Hagensvej 21 | DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
13
USER MANUAL
–
RAIZER
–
EN VERSION 03.02
9.3
Assembly of right-hand side
Items for assembly on the left-hand side are marked with a
green
circle.
1.
Carefully turn the person’s shoulder by a
push of the elbow.
Carefully push the back rest (marked
green
for right-hand side) in under the
person’s shoulder.
2.
Slide the back rest in and click into place
in the seat.
If necessary, place a foot in front of the
seat to prevent it from moving forward.
3.
Push the rear leg (marked
green
for
right-hand side) onto the shaft and click
into place.
Note
Right-hand and left-hand rear legs are
mounted on the drive shaft so they are
parallel, i.e. in the same position as the
opposite side.
4.
Slide the front leg (marked
green
for
right-hand side) into the seat and click it
in place.
Note
The snap-lock must face outwards.
Only raise the chair when you are sure that the person’s feet, arms, hands
or other
body parts are not at risk of being struck or run over by the action of the chair!