Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Danmark | T: +45 96 86 30 20 | M: [email protected] | www.liftup.dk
USER MANUAL
–
RAIZER® M
–
GB VERSION 1.0
22
15.
Troubleshooting
Error
Cause
Solution
The Raizer does not run up
when the crank handle is
turned
The Raizer is overloaded.
Remove the load from the
Raizer
–
or you may try to
turn the crank handle more
slowly.
The Raizer cannot be
assembled when it is lying on
the floor.
The Raizer has not been run
down after its last usage.
Run the Raizer down to the
correct position, see section
12.
Enjoy your new Raizer!
Best regards,
Liftup A/S