Operator’s Manual
Part Number M00972A
MLM Mini-Pro Series
20
Copyright © 2012 LiftSmart
TWO-SPEED SHIFT
To change the winch speed, push the
winch handles sideways in the direction
of the desired speed
Í
SLOW
y
SPEED
y
FAST
Î
Push the winch handles to the left to
shift the winch to the slow speed
Push the winch handles to the right to
shift the winch to the fast speed
Turn the winch handles toward the mast
until the winch locks
RAISING AND LOWERING THE LOAD
Set up the material lift and position the
load according to the procedures on the
previous pages
Verify that the load is secured to the
load lifting attachment
Shift the winch to the desired speed
Firmly grasp both winch handles
Rotate the winch handles toward the
mast to raise the load
Rotate the winch handles away from the
mast to lower the load
UP
DOWN
After lowering the load to the desired
position, rotate the winch handles one
quarter-turn toward the mast - as if
raising the carriage - to set the brake
AFTER USE
Reverse the set up procedure to prepare
the material lift for storage.
Store the material lift on a firm, level
surface that is protected from the weather,
dirt and other hazards that could reduce the
lifespan of the equipment.
