background image

Operator’s Manual 

Part Number M00972A 

MLM Mini-Pro Series

 

16 

Copyright © 2012 LiftSmart

 

FUNCTION TEST 

After the material lift is set up, perform the 
following test to verify that the equipment is 
not malfunctioning: 

‰

  Shift the winch to the slow speed 

‰

  Firmly grasp both winch handles 

‰

  Rotate the winch handles toward the 

mast to raise the carriage to its full 
height 

The winch should operate smoothly, without 
hesitation or binding, and the motion should 
raise the carriage to the top of the first mast 
section followed in order by each 
consecutive mast section. 

‰

  Rotate the winch handles away from the 

mast to completely lower the carriage  

‰

  Rotate the winch handles one quarter-

turn toward the mast - as if raising the 
carriage - to set the brake 

 

UP

  

DOWN

 

The winch should operate smoothly, without 
hesitation or binding. 
 

 

WARNING 

If the equipment malfunctions, remove 
the material lift from service 
immediately. Repairs to the material lift 
should only be performed by authorized 
personnel according to the 
manufacturer’s specifications.  

WORK AREA INSPECTION 
NEVER

 set up the material lift where any of 

the following hazards exist: 

‰

 Drop-offs 

‰

 Holes 

‰

 Debris 

‰

  Uneven or unstable surfaces 

‰

  Surfaces that will not support the forces 

imposed by the material lift, its operation 
and its load. 

‰

 Slippery surfaces 

‰

 Slopes 

‰

 Overhead obstructions 

‰

  Power lines or other electrical 

conductors 

‰

  High winds or inclement weather 

‰

 Moving vehicles 

 

ALWAYS

 position the material lift on a firm, 

level surface. 
 
 

Содержание MLM Mini-Pro Series









Отзывы: