35
PLATES (13.1+X15)
(SEE FIG.3)
the following plates are place
on the machine:
a)truck type data plate
B)Plate indicating the load diagram ac-
cording to the hoisting height and
the fork load centre position
c)Plates indicating the sling points
d)feet crushing danger warning plates
e)forbidden use warning plates
f) manual reading warning plates
G) Handle use plate
FIG. 3
In no case may the plates be removed or made illegi-
ble.
IMPORTANT: IT IS FORBIDDEN TO EXCEED THE LOAD
SHOWN ON THE B TYPE PLATE FIXED TO THE MACHI-
NE AT THE MOMENT OF SALE AND SHOWN HEREUN-
DER:
This diagram illustrates the relationship between the ma-
ximum load that can be lifted and the relative maximum
heights from the ground during loading and unloading
operations of a pallet from a shelf.
The fork diagram shown to the side indicates the centre of gravity of the load that,
however, must be distributed as uniformly as possible along the whole length of the
fork!!
TRANSPORT AND SET UP
Transport (14.6)
to transport the truck, a sling point is marked on the type “c” shield (fig. 3), while its weight
is marked on the type “a” shield (fig. 3). While driving, make sure the truck is firmly fixed, so
as to avoid its tilting. make sure that no acid nor vapour is leaking from the battery (if any).
Set up (15.2)
Before starting the machine check that all the parts are in perfect condition, check the per-
formance of all the units and the safety devices.
