ANDROID Guide For
Hydraulic Control
5. Press on the Lift - Signal Strength that comes up
on the phone to pair it.
6. Once the phone is paired it will look like PIC 3.
You are now done pairing your phone with the
control panel.If you want to rename your lift simply
press the rename tab on the top right of the app
and a box will come up like in PIC 4. Rename it to
what you want and hit Rename to save it.
7.
UP
..... Tapping and holding this button will raise the lift.
DOWN
....Tapping and holding this button will lower the lift.
LIGHT
..... Tapping this button will turn your canopy light on or off.
LOCK
..... Hold for 5 seconds to lock or unlock the control panel.
1. Go to Google Play and search for Lift Tech Marine and download the app.
Once installed open the app.
2. To activate the Bluetooth pairing sequence press the UP and DN buttons
on the control panel at the same time then release. (See picture below).
3. Press the scan button on the top right of your phone. (See PIC 1)
4. When the phone finds the motor it will look like PIC 2.
PIC 1
PIC 2
PIC 3
PIC 4
