Lift-Rite,
Tel:
Toll Free from USA: 1-800-558-6012, Greene, NY 13778, Publication Number 1234959D ©2022 Dated 14 Sep 2022
29
Calibrating the single point
•
Use the
and
keys to return to the first point.
•
The indicator shows the value of the first calibration point, with the “e1”pointer flashing.
•
Load the scale with a known weight.
•
Press the
key to enter this weight onto the indicator
.
The first segment starts flashing.
•
Use the
and
keys to change all the segments until the proper weight is entered.
•
Press the
key to return to calibration mode. The “e1” pointer starts flashing.
•
Press the
key for 3 seconds to confirm the entered weight.
•
This calibration number counts down from “Adj 08” to “Adj 00”. The first calibration point is
now set.
•
Leave the calibration mode by pressing the
or
key until “AP XX” is shown. This number
indicates the calibration sensitivity percentage, for example, “AP 0”.
•
Press the
key.
•
The display shows the value of the gravitation constant. Use the
,
, and
keys to
correct this for your location.
•
Press the
key to return to the standard weighing mode.
