Lift Foils LIFT eFOIL, Инструкция по эксплуатации

Страница: 41 / 48

• If the connectors encounter salt water or debris, clean them out with
fresh water and allow them to properly dry.
NOTE: If riding in salt water, rinse the data connector directly with fresh water.
• Once a month, use the provided ReelX oil to coat the electrical
contacts at least once a month and more with frequent use.
NOTE: This will also prevent corrosion.
NOTICE: This oil can be used on the rubber seals to provide lubrication
for a smooth connection. It also works well on any metallic surfaces,
such as the compression latches and hinges.
• Be sure the inside of the compartment is completely free of moisture
before closing the hatch and storing your eFoil.
• When storing your eFoil, make sure to use the provided bags and
cases and don’t store them in direct sunlight. UV and excessive heat
exposure can cause permanent damage.
• Don’t leave the hand controller in direct sunlight for an extended
amount of time.
The electrical contacts are critical in the eFoil. Scratches, salt water,
corrosion, and any other damage to the electrical contacts and
connectors can cause rapid degradation and will lead to system
failure. The electrical contacts and connectors are of the highest
quality but need to be maintained to stay that way. Take care of the
electrical connectors.
Being diligent about inspecting your data connectors, regular
cleaning and use of ReelX will greatly extend the life and durability
of your data connectors!
41
THESE STEPS PREVENT DAMAGING CORROSION AND KEEP THE
LIFT IN OPTIMAL CONDITION.