5
TOOLS AND HARDWARE REQUIRED
X
SECTION 1 (CONTINUED)
1.1
1.2
• Insert two
Tap Bolts (ABG)
with the
Washers (ABD)
and the
Rubber Washers (ABF)
through the bottom holes in the back of the
Rim
(ALX)
as shown, and secure the hardware with two
T-Nuts (AAJ)
.
• Insert the
U-Bolt (BNP)
through the upper part of the opening on the backside of the
Backboard (AJI)
as shown.
• Make sure that the Tap
Bolts (ABG) are positioned
on the outside edge of the
holes as shown.
• Do not overtighten the hardware
so much that the Rubber Washers
bulge outward as shown.
!
!
1/2"
(13 mm)
(x2)
ABD
(x2)
ABF
(x2)
ABF
ABF
AAJ
(x2)
AAJ
ABG
ABD ABF
ALX
ABG
ABG
AAJ
AAJ
ALX
ABG
(x2)
BNP
(x1)
• The Backboard Brackets shown
here are provided with the
Mounting Kit (sold seperately)
or with your original unit. The
actual Brackets may vary, but
the assembly steps still apply.
See page 10 for more details.
!
BNP
AJI
• Before performing this step, assemble the U-Bolt (BNP) to the Backboard Brackets (not included) as instructed by using the hardware and the
assembly manual of the Mounting Kit (sold seperately) or your original unit.
Backboard Bracket
