46
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
4FDVSFUIF
Pump Adjust Actuators (CMR)
UPUIF)BOEMFXJUIUIFIBSEXBSF
TIPXO.BLFTVSFUPQMBDFUIF
3/8” Plastic Washers (CKV)
CFUXFFOUIF
)BOEMF"TTFNCMZBOEUIF
Pump Adjust Actuators (CMR)
BTTIPXO
SEC
4.7
9/16”
Y
CHQ
Y
ABB
Y
AKF
ABB
CMR
CMR
CKV
CKV
Y
CHQ
Note: Line up the holes in the Pump Adjust Actuators (CMR) so the top of the slanted holes lean
toward the Gas Spring (AKF). The Bolt must go through the small holes on the Handle and Actuators.
!
Note: Tighten the Nut (ABB) until it is fl ush with the end of the Bolt (CHQ).
!