manualshive.com logo in svg

Lifetime CRANK ADJUST 90569, Руководство по сборке

Поделиться
Скачать
Lifetime CRANK ADJUST 90569 Скачать руководство пользователя страница 33

29

TOOLS AND HARDWARE REQUIRED 

X

 SECTION 7 (CONTINUED) 

7.3

•  Position the Pole so the slots in the plate at the bottom of the Pole align with the two J-Bolts closest to the playing 

surface. Push the plate against the Bolts, ensuring the slots are aligned exactly with the Bolts. With the system 
adjusted to its lowest position, have 

at least three adults

 slowly and carefully lift the Pole so the Bolts slide through 

the slots. Align the holes at the back of the plate with the Bolts at the back of the Template, and stand the system 
completely upright.

!

• Avoid scraping the holes in the 
plate over the Bolts, as this can 
damage the threads.

!

• 

WARNING: 

The assembled system is very heavy. At least three adults are 

required to complete these steps. Keep hands and fingers clear of pinch points. 
Do not put hands or fingers between the Pole and the mounting plate at any time. 
Stand the Pole up slowly and carefully. Failure to follow all of these instructions and 
warnings could lead to property damage or serious personal injuries.

Содержание CRANK ADJUST 90569









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды