manualshive.com logo in svg

Lifetime 90180, Руководство пользователя

Поделиться
Скачать
Lifetime 90180 Скачать руководство пользователя страница 22

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

22

SEC 

2

EIP

 (x1)

AEH

 (x2)*

CYC

 (x2)*

*not shown at actual size

15/16"

3/8”

CYQ

 (x1)*

EKN

 (x4)*

(not actual length)

8.875”

EKV

 (x1)

SEC 

2.7

Have one adult hold the 

Lifter Arms (ALS)

 in place as shown. Attach the Lifter Arms to the 

Handle Assembly (AKI)

 with the 

 

Bolt (EKV)

. Make sure to slide the 

Handle Lock Bracket (AKX)

 and the Spacers shown onto the Bolt as it passes through 

the Handle Bracket, Lifter Arms, Handle Assembly and Gas Springs. Secure the hardware with a 

Centerlock Nut (EIP)

. 

Use a Rubber Mallet, if necessary, to tap the Bolt into place.

ALS

AKI

!

Note:  Coat the 5/8” x 8 5/8” Bolt (DDX) lightly with White 
Silicone Grease (AKH) before performing this step.  DO NOT USE 
the Dark Lithium Grease, as this may damage the Gas Springs.

WARNING

Slide the Lock Bracket over the Trigger Pin and 
use the Pad Lock provided to lock the Handle in 
place once this step is complete. Failure to lock 
the Handle may result in serious personal injury.

EKV

EIP

ALS

ALS

AEH

AEH

CYC

CYC

CYQ

EKN

!

Note:  Coat the Bolt (EKV) lightly with White Silicone Grease 
(AKH) before performing this step.  DO NOT USE the Dark 
Lithium Grease, as this may damage the Gas Springs.

AKX

CAUTION

Use only silicone grease during this step. 
Lithium grease may damage the gas springs.

!

TOO TIGHT
TROP SERRÉ
DEMASIADO APRETADO

FLUSH

SLIGHT GAPS
PETITES LACUNES
PEQUEÑAS BRECHAS

À RAS

A RAS

!

Note:  DO NOT overtighten the hardware. The Handle 
components must move freely around the Bolts. 
A slight gap should be visible on each side of the 
spacers.

DO NOT OVERTIGHTEN THE HARDWARE!

Содержание 90180















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды