manualshive.com logo in svg

Lifetime 90180, Руководство пользователя

Поделиться
Скачать
Lifetime 90180 Скачать руководство пользователя страница 2

2

REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM 

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

REGISTER today!

At Lifetime

®

, we are committed to providing innovative and quality products. While registering, you will have the opportunity to give us your feedback. Your 

input is valuable to us.

•  You can also opt in to receive new product notifi cations or promotions.
•  In the unlikely event of a product recall or safety modifi cation, your registration provides the information we need to notify you 

directly. 

•  Registration is fast, easy, and completely voluntary.

Maintaining your privacy is our long-standing policy at Lifetime

®

. And you can rest assured that Lifetime

®

 will not sell or provide 

your personal data to other third parties, or allow them to use your personal data for their own purposes.

Save this instruction in the event that the manufacturer has to be contacted for replacement parts.

Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.

To ensure safety, do not attempt to assemble this product without reading and following all instructions carefully. Check the entire 
box and inside all packing materials for parts and/or additional instruction material. Before beginning assembly, identify and inventory 
all parts and hardware using the parts and hardware lists and identifi ers in this document. Proper and complete assembly, use and 
supervision are essential for proper orientation and to reduce the risk of accident or injury. A high probability of serious injury exists 
if this product is not installed, maintained, and/or operated properly. Failure to comply with any of the warnings in this instruction 
manual may result in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death. Failure to 
comply may also result in property damage. Please heed all warnings and cautions.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY 

DAMAGE AND WILL VOID WARRANTY.

• If using a ladder during assembly, use extreme caution.
• At least six capable adults are recommended for this operation.
• Assemble the pole properly. Failure to do so could cause serious injury or property damage.

SAFETY INSTRUCTIONS

**U.S. and Canada customers ONLY**

FOR CUSTOMERS OUTSIDE THE U.S. OR CANADA, PLEASE CONTACT THE STORE FOR ASSISTANCE.

 

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at

 

1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)

**Call, or visit our Web site for Saturday hours**

Questions or Missing Parts?

ID:

TO SAVE TIME WHEN CONTACTING CUSTOMER SERVICE, PLEASE HAVE THE PRODUCT ID AVAILABLE BEFORE YOU CALL; IT’S LOCATED AT THE 

BOTTOM-LEFT CORNER OF THE FRONT PAGE OF THIS MANUAL.

INSTRUCTION #1183320 B

2/6/2018

COPY

Содержание 90180















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды