manualshive.com logo in svg

Lifetime 90135, Руководство по сборке

Поделиться
Скачать
Lifetime 90135 Скачать руководство пользователя страница 3

5

WARNINGS & NOTICES 

Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.

To ensure safety, do not attempt to assemble this product without following the instructions carefully. Check entire box and inside all packing 
material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts using the hardware 
identifi er and parts list in this document. Proper and complete assembly, use and supervision are essential for proper operation and to reduce the 
risk of accident or injury. A high probability of serious injury exists if this product is not installed, maintained, and operated properly. 

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY.

Owner must ensure that all players know and follow these rules for safe operation of the system.

• If using a ladder during assembly, use extreme caution.
• Three capable adults are recommended for this operation.
• Be aware that parts can be damaged by overtightening the screws.
• All who participate in the assembly process should wear safety glasses throughout the assembly.

SAFETY INSTRUCTIONS

Содержание 90135



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды