3
BEFORE BEGINNING ASSEMBLY
Keep the hardware bags and their contents separate. If any parts are missing, call our
Customer Service Department
Test fi t all Bolts by inserting them into their respective holes. If necessary, carefully scrape
away any excess powder coating buildup from inside the holes. Do not scrape away all
of the powder coating. Bare metal may rust. You may need to pound some Bolts into
place with a hammer or mallet.
Verify that all bolts fi t by inserting them into their respective holes. If necessary, carefully
scrape away any excess powder coating from inside the holes. Do not scrape away all
the powder coating. Bare metal can rust. You may need to tap some bolts en place with
a hammer or rubber mallet.
*Two adults required to
complete assembly*
(+ one adult to read the instructions)
Only adults should assemble this unit. Do not allow children to
enter the assembly area until after assembly is complete.
1/2” Wrench
Safety Glasses
Phillips Screwdriver
(1)
(1)
(2)
TOOLS REQUIRED FOR THIS ASSEMBLY