Shelf Installation
1
1001693
#2 Screwdriver (1)
1a
SC
(30)
Insert Shelf Brackets (SA) into notches in any Wall Support
Channel. Place the Shelves on brackets and secure with #10
screws (SC) and #10 Washers (SD).
1b
Install a Back Shelf Bracket (SB) to each Shelf with a #10 screw (SC). Line up the Bracket so that it will
connect to the wall in between grooves. Attach it to the bottom of the shelf. Then screw the Bracket into
the wall.
Insert Brackets into the inside
set of slots on the Wall Channels.
Otherwise Brackets will be too
far apart to support shelves.
1c
Shelves may also be installed in between trusses to provide overhead storage. Rest a shelf between
two trusses. Attach shelf to Truss Channels through slotted holes in channels.
SD
(20)
SD
SC
SA
Note: This is an interior upward view.
SC
SC
Alternate Shelf Location
The shelves fit length wise
inbetween the Trusses.
SB
