Unfold Transporter by tilting to one side and pushing down on seat rails.
Lift Backrest using the handgrips until both Release Levers lock into place.
Attach Footrests by aligning holes on Footrests with hinge pins on outside of front
frame then swing Footrests to front until Footrest Release Levers lock into place.
Adjust Footrest length by loosening the Screw Knob and moving the inner tubing
up or down to desired setting making sure the Footplate is at least 2 ½ inches
from the floor for proper clearance. Then tighten Screw Knob until secure.
USER MANUAL - Transporter Aluminum Wheelchair Transport Chair 2 in 1
GENERAL EXPLANATION
2
1
2
3
ASSEMBLY INSTRUCTIONS
To Fold the Translator for Storage
Read entire manual and save for future reference. If you do not understand
any part of this manual or require additional assistance, contact your healthcare
provider or your Lifestyle Mobility Aids Dealer. Failure to follow the instructions in
this manual can lead to personal injury and/or property damage.
4
Push Handle
Armrest Height Adjustment Button
Mesh Storage Pocket
Fold Down
Backrest
Release Lever
Hand Grip
Heel Strap
24” Rear Wheel
Footplate
To Set Up the Translator for Use
1
Make sure the Footrests are in the forward locked position with the Footplates in
the vertical position or REMOVE the Footrests by pulling the Release Levers,
swinging the Footrests outward and lifting them from the hinge pins.
Push the Release Levers on the Backrest toward the chair and fold down.
Standing behind the chair, grab the center of the seat and pull up until
2
3
Soft Side Guards
Footrest Release Lever
7” Caster
Quick Release
Axle Button
8” Rear Wheel
Tipping Lever
Footrest Height
Adjustment Screw Knob
Wheel Locks (4)
2 for 24” Wheel &
2 for Rear 8” Wheel
fully closed.
