27
TRACTION
II
13
. TROUBLE SHOOTING GUIDE
72
Bolt
ST4.2*15
34
73
Bolt
M5*10
7
Fault code
Fault description
Fault processing
E01
Abnormal communication
with computer
The machine cannot run
, the computer shows fault code“E1”,
and
three “beeps” will sound.
Possible reasons: communication is obstructed between
controller and computer, please check the wire and make sure
the wire is connected well and is not damaged.
E02
No Speed Wireless
Sensor Network
Computer displays shows fault code
“E02” with other areas
blank. After 10 seconds machine will go into ready mode, and
can be restarted.
Possible Reasons:
Can’t receive motor speed sensor feedback
within 3 seconds, please check sensor plug, motor connection
wire and the controller.
Abnormal communication
with computer and
controller after startup
The machine cannot run, the computer shows fault code
“E02”,
and
three “beeps” will sound.
Possible reasons: communication is obstructed between
controller and computer, please check the wire and make sure
the wire is connected well and is not damaged.
Содержание Traction II
Страница 24: ...24 TRACTION II 11 EXPLODED DIAGRAM ...