LifeSpan TR5000i, Руководство пользователя

Страница: 35 / 40

Engineering Mode
Press and hold STOP and then Speed for 3 seconds to
enter Engineering Mode
Press Enter / Mode
Guard automatically pauses the unit if it detects the
treadmill is not being walked on. Press Speed / Incline
Press Enter / Mode to show Roller diameter
Press Enter / Mode to set up the units of measurement
in Metric (SI) or in English (EN).
Press Speed / Incline UP / DOWN to change
Press Enter / Mode for Distance
This is the total distance the treadmill has been run
in Miles or Kilometers depending on what mode the
treadmill is in.
Press Enter / Mode for Workout Time
This is the total number of hours the treadmill
has been used.
Press Enter / Mode again to return to the standby mode.
150
Roller
625
En or Si
Total Distance
0 000
0 000
Total Hours
Set Calendar On
Press Enter / Mode to set up Calendar
Calendar Operation:
Engineering Mode
Intelli-Guard On
Select the units
(incline window shows software version) 2009.06.18
Press STOP and then Speed up to enter the Engineering Mode. You can press Enter / Mode to
switch setup screens, or press STOP+Speed up to return to Standby Mode. The table below
shows the sequence of the setup screens.
Information viewed on screen
Engineering function
Press Enter / Mode to turn console sleep mode on
display lit all the time.
35
TR5000i
Treadmill