LifeSpan TR2000e, Руководство пользователя

Страница: 45 / 54

43
Personal Settings
Follow the steps below to make changes to the Personal Settings options.
Configuration Steps Information Displayed
Press and hold STOP and then SPEED + for 3 seconds to
enter Personal Settings Mode. The first screen shows the
software version for your console.
Press ENTER to continue
Engineering Mode
104
17. 7.2014
Press SPEED +/- to turn I ntell-Guard ™ on and off.
Press ENTER to continue
Intelli-Guard On or Off
Roller Size is displayed. (Do not modify)
Press ENTER to continue
Roller
097
Press SPEED + / - to change from
English
(EN) to
Metric
(SI).
Press ENTER to continue.
Select the units
EN or SI
Press Speed +/- to turn
Calendar
on or off.
(Do not modify)
Press ENTER to continue
Set Calendar On or Off
Press SPEED +/- or to turn
Energy Saving
mode on or off.
Press ENTER to continue
Electricity On or Off
This screen shows the Total Distance exercised in miles
or kilometers.
Press ENTER to continue
Total Distance
0 000
This screen shows Total Hours of use.
Press ENTER to continue
Total Hours
0 000
Press SPEED +/- to set the amount of Pause Time
required before the treadmill resets. The options in
seconds are 90,180, 300 or Off.
Press ENTER to continue
Select the pause time
90, 180, 300 or Off
Press Speed +/- to turn Audible Beep on or off.
Press ENTER to continue
Beep On or Off
Press SPEED +/- Resume Speed allows the treadmill to
start at the speed it was running when paused. (If set to
0, the treadmill will start at .5 mph. If set to 1, the tread-
mill will start at the pre-paused speed.)
Press ENTER to return to normal console operations
Resume Speed 0 or 1
Controls whether the warm up/cool down feature is
enabled.
Warm / Cool On or Off
Maintenance and Tips