LifeSpan TORQUE III, Руководство пользователя

Страница: 32 / 34

32
TORQUE III
41 Bolt ST4.2*15 4 89 Bolt ST4.2*19 6
42 Computer Up Wire 1 90 Cushion 4
43 Incline Motor 1 91 Bolt M6*16 4
44 DC Motor 1 92 MP3 Wire 1
45 Control Board 1
46 Oil 1
47 Bolt ST4.2*19 7
48 Computer bottom Wire 1
TROUBLESHOOTING
CODE REASON SOLUTION
E01 Message failure between computer
and bottom control board
1
． Check the computer and
bottom control board wire
connect well;
2
．
Check if IC on bottom control
board is loosen, reset the IC
3
．
Power on bottom control board
has some problem, change the
bottom control board
E02 Burst clash
1
．
Check the power is right, if not,
use correct power to test;
2
．
Check if the bottom control was
burnt out, change a good one;
reconnect the motor wire.
E05 Current overload protecting
1.
Over rated loaded or the motor
is stuck, cause excessive
current, machine will start self-
protecting system. Adjust the
machine and restart;
1
． Check if the motor has noise
from motor or if the motor /
bottom control board were
burnt out, if burnt out, change
good motor and bottom control;
Use right voltage.
E06 Control boardself-checking Change the control board
E07 Missing parameter Change the control board or
change the
parameter